I’m running into a problem with my colymPrinterXPS printer profile for A4 page size. I keep getting white bands on 2 sides of the page.
When I print directly to my printer – without colymPrinterXPS in the middle - there are no white bands.
I used The Gimp and OM Workspace and both programs show the issue.
I configured my Epson ET-4850 printer setting with A4, Premium Glossy paper and borderless printing.
The print window looks like this (printed without Colymp):
In my colymPrinterXPS profile I copied the exact same settings and the print window looks like this:
On the left and right are white bands.
Whatever I try and change in the profile settings I cannot get rid of the white bands.
I have the same profile for 10 x 15 photos and both the Epson and colymPrinterXPS give the same borderless prints. The problem only shows with A4 format.
I appreciate any advice.
==============================
The photo format is .ORF (Olympus RAW)
Exif data for this photo:
Image width : 4640
Image height : 3472
Pixel composition : 1
Image title : OLYMPUS DIGITAL CAMERA
Image input equipment manufacturer : OLYMPUS IMAGING CORP.
Image input equipment model : E-M1
Image data location : 1491456
Orientation of image : Positive direction
Number of components : 1
Number of rows per strip : 3472
Bytes per compressed strip : 14201887
Image resolution in width direction : 350/1
Image resolution in height direction : 350/1
Image data arrangement : chunky format
Unit of X and Y resolution : inches
Software used : Version 4.6
File change date and time : 2024:06:24 16:26:05
Author :
Copyright holder :
Exif IFD Pointer : 302
Exposure time : 1/250 sec
F number : F10
Exposure program : Normal program
PhotographicSensitivity : 200
Sensitivity Type : Standard Output Sensitivity
Exif version : 2.3
Date and time of original data generation : 2024:06:24 16:26:05
Date and time of digital data generation : 2024:06:24 16:26:05
Exposure bias : 0 EV
Maximum lens aperture : F3.5
Metering mode : Pattern
Light source : unknown
Flash : OFF
Lens focal length : 50 mm
Manufacturer notes : OLYMPUS
User comments :
Supported Flashpix version : 1.0
Color space information : sRGB
File source : DSC
CFA pattern : 2 x 2 : B G G R
Custom image processing : Normal process
Exposure mode : Auto exposure
White balance : Auto white balance
Digital zoom ratio : 100/100
Scene capture type : Standard
Gain control : Low gain up
Contrast : Standard
Saturation : Standard
Sharpness : Standard
LensSpecification : 12/1 50/1 35/10 63/10
LensModel : OLYMPUS M.12-50mm F3.5-6.3
GPS Info IFD Pointer : 698
GPS tag version : 2.3.0.0